SwitchDoc Labs Blog

SwitchDoc Labs Blog

For Makers, by a Maker

  • Home
  • Store
    • SwitchDoc Labs Products
  • Projects
    • SkyWeather2
    • Smart Garden System V2
    • MouseAir – Raspberry Pi Cat Toy
    • Project Curacao3
    • Project Curacao2
    • Project Curacao
    • BeaconAir / iBeacons
    • SunRover
  • Tutorials
  • Distributors
  • Support
  • In the News
  • Contact Us
  • About
News Ticker
  • [ June 5, 2024 ]
  • [ May 27, 2024 ]
  • [ May 18, 2024 ]
  • [ September 23, 2023 ] Discussion of RSSI, SNR and NOISE Values from WeatherRack2 SwitchDoc Products
  • [ April 22, 2023 ] Grove Mini Pro LP Schematics Posted Arduino
HomeSunAirPlus

SunAirPlus

ESP32

Tutorial: Changing MQTT Server IP on Solar SkyCam

April 10, 2022

Tutorial: Changing MQTT Server IP on Solar SkyCam The MQTT Server IP is set during initial configuration of the Solar SkyCam remote WeatherSense camera.  The Solar SkyCam is a solar powered remote camera supported by SkyWeather2 and the WeatherSense product […]

ESP32

Tutorial: Adding More Solar Panels to SkyCam and WeatherSense Sensors

August 14, 2021

Adding More Solar Panels to SkyCam and WeatherSense Sensors Sometimes your solar powered sensors are in less than an ideal position or location to keep your batteries fully charged by the solar power system.    A cloudy climate (and remember […]

ESP32

Tutorial: Solar Power Selection Guide for Maker Projects

June 15, 2020

Tutorial: Solar Power Selection Guide for Maker Projects Selecting a Solar Power system for your project is a confusing thing the first time.   This tutorial is an introduction to sizing solar power systems to fit the computer projects being […]

Arduino

Secrets of the Solar Powered SunAirPlus2 Controller – Application Notes

April 26, 2020

Secrets of the Solar Powered SunAirPlus2 Controller – Application Notes Want to Solar Power your project? .  What we are talking about here are  three ways of using the SunAirPlus2 that aren’t completely documented in the specification.   Buy it here! […]

3D Printing

Tutorial: Part 5 – The Software – IOT ESP32 Solar Powered WiFi Night Light

August 30, 2018

Tutorial: Part 5 – The Software – IOT ESP32 Solar Powered WiFi Night Light Using the REST Software Here is your chance to build a solar powered  WiFi remote control ESP32 based nightlight for use outdoors.   The full Solar Powered […]

3D Printing

Tutorial: Part 4 – Boxing It Up – IOT ESP32 Solar Powered WiFi Night Light

August 25, 2018

Tutorial: Part 4 – Boxing It Up – IOT ESP32 Solar Powered WiFi Night Light Boxing it Up for Outside Here is your chance to build a solar powered  WiFi remote control ESP32 based nightlight for use outdoors.   The full […]

3D Printing

Tutorial: Part 3 – Assembly – IOT ESP32 Solar Powered WiFi Night Light

August 21, 2018

Tutorial: Part 3 – Assembly – IOT ESP32 Solar Powered WiFi Night Light Step-By-Step Assembly Guide Here is your chance to build a solar powered  WiFi remote control ESP32 based nightlight for use outdoors.   The full Solar Powered Nightlight kit […]

3D Printing

Tutorial: Building an IOT ESP32 Solar Powered WiFi Night Light – Part 2

August 19, 2018

Tutorial: Building an IOT ESP32 Solar Powered WiFi Night Light – Part 2 Parts List and what each Part Does in the Project! Here is your chance to build a solar powered  WiFi remote control ESP32 based nightlight for use […]

3D Printing

Tutorial: Building an IOT ESP32 Solar Powered WiFi Night Light – Part 1

August 17, 2018

Tutorial: Building an IOT ESP32 Solar Powered WiFi Night Light – Part 1 Here is your chance to build a solar powered  WiFi remote control ESP32 based nightlight for use outdoors.   The full Solar Powered Nightlight kit comes with mounting […]

OurWeather Solar WXLink
AM2315

OurWeather Extender Package – Solar WXLink for Weather Sensors

April 29, 2018

OurWeather Extender Package – Solar WXLink for Weather Sensor   SwitchDoc Labs is please to announce the new OurWeather Extender Kit Solar WXLink   You can now go up to 6000 meters and even further with larger antennas.   We have also […]

Posts pagination

1 2 … 8 »

Subscribe to SDL via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 4,289 other subscribers

Pie R2 by RuthAnn Wachsmuth

Top Posts & Pages

  • Tutorial - Using Capacitive Soil Moisture Sensors on the Raspberry Pi
    Tutorial - Using Capacitive Soil Moisture Sensors on the Raspberry Pi
  • Benchmarks:  RealTime Clocks - DS3231 / PCF8563 / MCP79400 / DS1307
    Benchmarks: RealTime Clocks - DS3231 / PCF8563 / MCP79400 / DS1307
  • Tutorial: Intro to Grove Connectors for Arduino/Raspberry Pi Projects
    Tutorial: Intro to Grove Connectors for Arduino/Raspberry Pi Projects
  • SunAirPlus Solar Power - INA3221 Python Raspberry Pi Library Released
    SunAirPlus Solar Power - INA3221 Python Raspberry Pi Library Released
  • SkyWeather2 Raspberry Pi Based Weather Station
    SkyWeather2 Raspberry Pi Based Weather Station
  • Tutorial: Waterproofing your Capacitive Moisture Sensors
    Tutorial: Waterproofing your Capacitive Moisture Sensors
  • ESP32 Tutorial: Debouncing a Button Press using Interrupts
    ESP32 Tutorial: Debouncing a Button Press using Interrupts
  • Tutorial:  Solar Power - Sizing your Solar Panels for the Raspberry Pi
    Tutorial: Solar Power - Sizing your Solar Panels for the Raspberry Pi

Tweets

Recent Topics

3D Printing AM2315 Arduino Arduino Software Breakout Boards ESP8266 Featured Topic Grove Grove Sensors GroveWeatherPi IOT Kickstarter Lightning Matplotlib Graphs MouseAir OurWeather Pi2Grover Pi Camera Products Project Curacao Project Curacao2 Projects Python Raspberry Pi Software Raspberry Pi RasPiConnect Real Time Clocks Sensors SkyWeather Software Solar Cells Solar Power SunAir SunAirPlus SunRover SwitchDoc Dual WatchDog Timer SwitchDoc Products Thunder Board Tutorials USB Power Control Weather Weather Board WeatherPiArduino WeatherPlus WeatherRack WXLink

Copyright © 2025 | MH Magazine WordPress Theme by MH Themes