SwitchDoc Labs Blog

SwitchDoc Labs Blog

For Makers, by a Maker

  • Home
  • Store
    • SwitchDoc Labs Products
  • Projects
    • SkyWeather2
    • Smart Garden System V2
    • MouseAir – Raspberry Pi Cat Toy
    • Project Curacao3
    • Project Curacao2
    • Project Curacao
    • BeaconAir / iBeacons
    • SunRover
  • Tutorials
  • Distributors
  • Support
  • In the News
  • Contact Us
  • About
News Ticker
  • [ September 23, 2023 ] Discussion of RSSI, SNR and NOISE Values from WeatherRack2 SwitchDoc Products
  • [ April 22, 2023 ] Grove Mini Pro LP Schematics Posted Arduino
  • [ April 22, 2023 ] Grove Mini Pro Plus Schematics Posted Grove
  • [ January 29, 2023 ] How to Build a WeatherRack3 – No Moving Parts – Weather Station 433MHz
  • [ December 31, 2022 ] WeatherRack2 Error Codes 433MHz
Products

SunRover Solar Power System and Multiplexer Working

October 13, 2015

SunRover Solar Power System and Multiplexer Working Yesterday, we took the SunRover robot out for her first walk.  The purpose of the test was to verify the solar power panels were working, the SunAirPlus chargers were working and the solar […]

Arduino

SunRover Robot – Solar Power System Ready to Test

October 9, 2015

SunRover Robot – Solar Power System Ready to Test Summary The SunRover solar power power system is ready to be taken out to see first light of the sun.  We have already tested it under a bright light.  We have made some significant […]

Arduino

SunRover Robot – Video – Power and Grounding Motor Noise Results

October 5, 2015

SunRover Robot – Video – Power and Grounding Motor Noise Results Summary The new power and ground distribution system seems to have completely fixed the issues with the DC motors switching on and off.  The Quad Power Management boards no […]

Arduino

Oooooo Shiny! SunRover Solar Power Mux Charging System Test

September 30, 2015

Oooooo Shiny!  SunRover Solar Power Mux Charging System Test Today we did the first set of tests on the Solar Power Mux on SunRover.   We hooked up a 6V DC power supply to the Solar Panel input (we wired an identical waterproof […]

Arduino

Flame On! SunRover Solar Powered Robot Raspberry Pi / Arduino Power Up

September 17, 2015

Flame On! SunRover Solar Powered Robot Raspberry Pi / Arduino Power Up Today we did the first power up on SunRover.   We had hooked up the power distribution system (3.3V, 5V and GND) throughout the equipment bay (a redo […]

Arduino

SunRover Solar Powered Robot Computers Installed

September 16, 2015

SunRover Solar Powered Robot Computers Installed Recently, we pulled the equipment bay off of SunRover and replaced it with a bigger box and a better power and ground distribution system.  We did this specifically because we were having problems with […]

Building Tips

SunRover Robot Ground and Power Distribution

September 14, 2015

SunRover Robot Ground and Power Distribution What is SunRover? SunRover is a tracked solar powered robot designed to move around and explore the area while sending back reports, tracking weather, managing a power budget tightly and providing a platform for […]

SwitchDoc Products

Project Curacao Survives Storm! Non-event….

September 11, 2015

Project Curacao Survives Storm!  Non-event…. The tropical wave hitting Curacao and Project Curacao yesterday and today was a complete non-event.   Not much rain, and it even looks like the winds were less than the day before.   A disappointment […]

Arduino Software

Big Storm Heads for Project Curacao! Raspberry Pi Beware!

September 10, 2015

Big Storm Heads for Project Curacao! Raspberry Pi Beware! Tropical Wave Onda is heading for Project Curacao.   The first waves of this storm (not a hurricane, just a warm wet storm) have already been through Curacao with some small […]

AM2315

What is the Solar Powered SunRover Robot? – Part 2

September 4, 2015

What is the Solar Powered SunRover Robot? – Part 2 What is SunRover? SunRover is a tracked solar powered robot designed to move around and explore the area while sending back reports, tracking weather, managing a power budget tightly and […]

Posts pagination

« 1 … 32 33 34 … 50 »

Subscribe to SDL via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 2,815 other subscribers

Pie R2 by RuthAnn Wachsmuth

Top Posts & Pages

  • ESP32 Tutorial: Debouncing a Button Press using Interrupts
    ESP32 Tutorial: Debouncing a Button Press using Interrupts
  • Tutorial: Waterproofing your Capacitive Moisture Sensors
    Tutorial: Waterproofing your Capacitive Moisture Sensors
  • What Are GPIO Pins Or General Purpose Input Output?
    What Are GPIO Pins Or General Purpose Input Output?
  • Tutorial - Using Capacitive Soil Moisture Sensors on the Raspberry Pi
    Tutorial - Using Capacitive Soil Moisture Sensors on the Raspberry Pi
  • Tutorial:  Provisioning your ESP32 for WiFi.  3 Different Ways.
    Tutorial: Provisioning your ESP32 for WiFi. 3 Different Ways.
  • SunAirPlus Solar Power - INA3221 Python Raspberry Pi Library Released
    SunAirPlus Solar Power - INA3221 Python Raspberry Pi Library Released
  • IOT ESP8266 Tutorial - Using nodeMCU/LUA
    IOT ESP8266 Tutorial - Using nodeMCU/LUA
  • Tutorial:  How does a Lightning Detector Work?
    Tutorial: How does a Lightning Detector Work?

Tweets

Recent Topics

3D Printing AM2315 Arduino Arduino Software Breakout Boards ESP8266 Featured Topic Grove Grove Sensors GroveWeatherPi IOT Kickstarter Lightning Matplotlib Graphs MouseAir OurWeather Pi2Grover Pi Camera Products Project Curacao Project Curacao2 Projects Python Raspberry Pi Software Raspberry Pi RasPiConnect Real Time Clocks Sensors SkyWeather Software Solar Cells Solar Power SunAir SunAirPlus SunRover SwitchDoc Dual WatchDog Timer SwitchDoc Products Thunder Board Tutorials USB Power Control Weather Weather Board WeatherPiArduino WeatherPlus WeatherRack WXLink

Copyright © 2026 | MH Magazine WordPress Theme by MH Themes