SwitchDoc Labs Blog

SwitchDoc Labs Blog

For Makers, by a Maker

  • Home
  • Store
    • SwitchDoc Labs Products
  • Projects
    • SkyWeather2
    • Smart Garden System V2
    • MouseAir – Raspberry Pi Cat Toy
    • Project Curacao3
    • Project Curacao2
    • Project Curacao
    • BeaconAir / iBeacons
    • SunRover
  • Tutorials
  • Distributors
  • Support
  • In the News
  • Contact Us
  • About
News Ticker
  • [ September 23, 2023 ] Discussion of RSSI, SNR and NOISE Values from WeatherRack2 SwitchDoc Products
  • [ April 22, 2023 ] Grove Mini Pro LP Schematics Posted Arduino
  • [ April 22, 2023 ] Grove Mini Pro Plus Schematics Posted Grove
  • [ January 29, 2023 ] How to Build a WeatherRack3 – No Moving Parts – Weather Station 433MHz
  • [ December 31, 2022 ] WeatherRack2 Error Codes 433MHz
Home2015September

Month: September 2015

Arduino

Oooooo Shiny! SunRover Solar Power Mux Charging System Test

September 30, 2015

Oooooo Shiny!  SunRover Solar Power Mux Charging System Test Today we did the first set of tests on the Solar Power Mux on SunRover.   We hooked up a 6V DC power supply to the Solar Panel input (we wired an identical waterproof […]

Arduino

Flame On! SunRover Solar Powered Robot Raspberry Pi / Arduino Power Up

September 17, 2015

Flame On! SunRover Solar Powered Robot Raspberry Pi / Arduino Power Up Today we did the first power up on SunRover.   We had hooked up the power distribution system (3.3V, 5V and GND) throughout the equipment bay (a redo […]

Arduino

SunRover Solar Powered Robot Computers Installed

September 16, 2015

SunRover Solar Powered Robot Computers Installed Recently, we pulled the equipment bay off of SunRover and replaced it with a bigger box and a better power and ground distribution system.  We did this specifically because we were having problems with […]

Building Tips

SunRover Robot Ground and Power Distribution

September 14, 2015

SunRover Robot Ground and Power Distribution What is SunRover? SunRover is a tracked solar powered robot designed to move around and explore the area while sending back reports, tracking weather, managing a power budget tightly and providing a platform for […]

SwitchDoc Products

Project Curacao Survives Storm! Non-event….

September 11, 2015

Project Curacao Survives Storm!  Non-event…. The tropical wave hitting Curacao and Project Curacao yesterday and today was a complete non-event.   Not much rain, and it even looks like the winds were less than the day before.   A disappointment […]

Arduino Software

Big Storm Heads for Project Curacao! Raspberry Pi Beware!

September 10, 2015

Big Storm Heads for Project Curacao! Raspberry Pi Beware! Tropical Wave Onda is heading for Project Curacao.   The first waves of this storm (not a hurricane, just a warm wet storm) have already been through Curacao with some small […]

AM2315

What is the Solar Powered SunRover Robot? – Part 2

September 4, 2015

What is the Solar Powered SunRover Robot? – Part 2 What is SunRover? SunRover is a tracked solar powered robot designed to move around and explore the area while sending back reports, tracking weather, managing a power budget tightly and […]

Arduino

Solar Powered Robot – What is in SunRover?

September 1, 2015

Solar Powered Robot – What is in SunRover? What is SunRover? SunRover is a tracked solar powered robot designed to move around and explore the area while sending back reports, tracking weather, managing a power budget tightly and providing a […]

Subscribe to SDL via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 2,815 other subscribers

Pie R2 by RuthAnn Wachsmuth

Top Posts & Pages

  • Tutorial: Using Blynk with the Raspberry Pi Smart Garden System in Python
    Tutorial: Using Blynk with the Raspberry Pi Smart Garden System in Python
  • Tutorial:  Connecting an Arduino to the 433MHz WeatherRack2
    Tutorial: Connecting an Arduino to the 433MHz WeatherRack2
  • Tutorial: IOT / Installing and Testing Mosquitto MQTT on the Raspberry Pi for Buster
    Tutorial: IOT / Installing and Testing Mosquitto MQTT on the Raspberry Pi for Buster
  • Tutorial:  Building an IOT ESP32 Solar Powered WiFi Night Light - Part 1
    Tutorial: Building an IOT ESP32 Solar Powered WiFi Night Light - Part 1
  • Tutorial:  Repairing Corrupted SD Cards for the Raspberry Pi on Mac
    Tutorial: Repairing Corrupted SD Cards for the Raspberry Pi on Mac
  • Tutorial:  Using a Logic Analyzer for Fun and Data
    Tutorial: Using a Logic Analyzer for Fun and Data
  • Bright Bright Bright LED (s) - Controlled by the QPM Board
    Bright Bright Bright LED (s) - Controlled by the QPM Board
  • The Hop Garden: First Smart Garden System on the Air with the Weather Add-on
    The Hop Garden: First Smart Garden System on the Air with the Weather Add-on

Tweets

Recent Topics

3D Printing AM2315 Arduino Arduino Software Breakout Boards ESP8266 Featured Topic Grove Grove Sensors GroveWeatherPi IOT Kickstarter Lightning Matplotlib Graphs MouseAir OurWeather Pi2Grover Pi Camera Products Project Curacao Project Curacao2 Projects Python Raspberry Pi Software Raspberry Pi RasPiConnect Real Time Clocks Sensors SkyWeather Software Solar Cells Solar Power SunAir SunAirPlus SunRover SwitchDoc Dual WatchDog Timer SwitchDoc Products Thunder Board Tutorials USB Power Control Weather Weather Board WeatherPiArduino WeatherPlus WeatherRack WXLink

Copyright © 2026 | MH Magazine WordPress Theme by MH Themes