[section]
[column size=”col-4″]
AM2315 Temperature and Humidity Sensor
The AM2315 is an I2C encased temperature and humidity sensor. ($23.95) Full Product Description here. With Software Drivers for Arduino and Raspberry Pi!
[/column]
[column size=”col-4″]
OurWeather Complete Weather Kit
OurWeather is a complete $149 Weather Kit. It is a ESP8266 Based connected weather station containing 7 different sensors that will teach about electronics, software and the weather. And Grove connectors!
With Software Drivers for Arduino and examples for Raspberry Pi.
[/column]
[column size=”col-4″ last_column=”true”]
Air Quality Sensor Extender Kit
This is an OurWeather Extender kit ($49) for adding an Air Quality Sensor to Our Weather. It also works with Raspberry Pi, Arduino and ESP8266 boards. It contains an Grove Air Quality Sensor, an Grove Analog to Digital 4 channel 16 bit board and a bonus I2C Hub.
With Software Drivers for Arduino and examples for Raspberry Pi.
[/column]
[clear]
[separator ]
[column size=”col-4″]
WeatherPlus All-in-One Weather Station Controller
WeatherPlus is an all in one weather station controller and is the board that is used in the OurWeather Complete Weather Kit.
WeatherPlus contains an ESP8266 processor (includes WiFi) and does not require an external computer to run. If you want to program the WeatherPlus board, we supply all of the source code to allow you to do that. The software for the board is written using the Arduino IDE with the ESP8266 libraries added.
[/column]
[column size=”col-4″]
Grove/Pin I2C Mux Extender / Expander Board
The Grove (and Pin Header) I2C 4 Channel Mux Extender / Expansion Board ($17.95) allows you to build 4 independent I2C Busses with their own address space and 3.3V or 5V. Full Description here. With Software Drivers for Arduino and Raspberry Pi!
[/column]
[column size=”col-4″ last_column=”true”]
3.3V/5V FTDI Cable
This product is a fully functional inexpensive 3.3V/5V (jumper selectable) FTDI Cable using the standard 6-pin female header on the bottom of the board. Full Product Description here. This is a board and cable utilizing the standard FTDI FT232RL USB to serial IC.
[/column]
[clear]
[separator ]
[column size=”col-4″]
Grove/Pin INA3221 Breakout Board 
The Grove Connector / Pin Headers INA3221 Breakout Board is an I2C three channel Measurement System for measuring current and voltage. Compare to 3 INA219 boards. ($17.95) Full Product Description here. With Software Drivers for Arduino and Raspberry Pi!
[/column]
[column size=”col-4″]
Dual Watchdog Timer
SwitchDoc Labs Dual WatchDog Timer Board for Arduino / Raspberry Pi ($15.95) Full Product Description here. With Software Drivers for Arduino and Raspberry Pi!
[/column]
[column size=”col-4″ last_column=”true”]
Grove / Pin SunAirPlusSolar Power Controller/Data Collector
SunAirPlus is a Solar Power Charging / Data Gathering / Sun Tracking Controller designed for DIY Solar Projects ($44.95) Full Product Description here. With Software Drivers for Arduino and Raspberry Pi!
[/column]
[clear]
[separator ]
[column size=”col-4″ ]
Grove OLED 128×64 I2C Display
This is an inexpensive ($14.45) I2C OLED display using Grove Connectors for the Arduino / Raspberry Pi / ESP8266With 
Software Drivers for the ESP8266, Arduino and Raspberry Pi! Full Description here.
[/column]
[column size=”col-4″]
SunAir
SunAir – Solar Power Charger / Sun Tracker Controller designed for DIY Solar Projects ($29.99) Full Product Description here. With Software Drivers for Arduino and Raspberry Pi!
[/column]
[column size=”col-4″ last_column=”true”]
USB Power Control
USB Power Control is your ultimate computer controlled on/off switch (with hysteresis!) for the Arduino and Raspberry Pi ($15.95) Full Product Description here. One GPIO Line required, or connect directly to your LiPo rechargeable battery.
[/column]
[clear]
[separator ]
[column size=”col-4″ ]
WeatherPiArduino
WeatherPiArduino (with included BMP180 Barometer/Temperature and DS3231 RTC) is the perfect interface board for weather instruments. Supports: SwitchDoc Labs WeatherRack, ADS1015, Embedded Adventures Lightning Detector, FRAM and Humidity Sensor. ($24.99) Full Product Description here. With Software Drivers for Arduino and Raspberry Pi!
[/column]
[column size=”col-4″ ]
WeatherRack
WeatherRack – Anemometer / Wind Vane / Rain Bucket designed for SwitchDoc Labs WeatherPiArduino Board and Raspberry Pi/Arduino ($74.95) Full Product Description here.With Software Drivers for Arduino and Raspberry Pi!
[/column]
[column size=”col-4″ last_column=”true”]
8 GPIO I2C Extender Board
The 8 GPIO I2C Extender Board ($8.00 single, Dual Pack $17.95) adds 8 GPIO/Interrupts accessible through the I2C from your Arduino or Raspberry Pi. Full Product Description here. With Software Drivers for Arduino and Raspberry Pi!
[/column]
[clear]
[separator ]
[column size=”col-4″ ]
Quad Power Management I2C Board
The Quad Power Management I2C Board ($22.95) allows you to switch on and off batteries, power supplies and solar panels. It is like an I2C controlled quad solid-state relay. Full Product Description here. With Software Drivers for Arduino and Raspberry Pi!
[/column]
[column size=”col-4″ ]
I2C 4 Channel Mux Breakout Board
The I2C 4 Channel I2C Mux Breakout Board allows you to have many more I2C devices in your project with no more address conflicts! ($11.95) Full Product Description here.With Software Drivers for Arduino and Raspberry Pi!
[/column]
[column size=”col-4″ last_column=”true”]
DS3231 Real Time Clock
Add a Real Time Clock to your Raspberry Pi or Arduino with the SwitchDoc Labs DS3231, AT24C32 EPROM, Battery and Software ($6.69) Full Product Description here. With Software Drivers for Arduino and Raspberry Pi!
[/column]
[/section]